1740PSI, 14 LPM. 5.5HP Honda Petrol Driven Pressure Cleaner – RENTAL SPEC (P6R-17C)
Model: P6R-17C
Honda Petrol Driven 5HP Cold Water Pressure Cleaner built to Rental Spec. Features a Hawk pump: HC280 at 1740 PSI Maximum Pump Pressure, 14 LPM. It is a low speed (~1450 RPM) pressure pump driven via a 2:1 gearbox connected to the Honda.
A reliable pressure cleaner for owner-operator or contractor use for cleaning drive ways, patios, for auto detailing, for general farm use and other general cleaning tasks. It is compact, robust and comes with a R2-rated double wire hose and an Italian-made Pressure gun with 900mm stainless steel lance.
2784 PSI EWP** using a Turbo Nozzle
(**EWP = Effective Working Pressure - a theoretical figure. Because the water stream from a turbo jet does not fan out and the force of the jet stream does not dissipate as is the case with a fan jet/nozzle, the concentrated pencil jet stream hitting the surface is equivalent to a cleaning effect around 60% higher than with a fan jet. And because the turbo nozzle /roto jet spins in a circular motion at a very high speed, it still covers the same surface area as with a normal fan jet/nozzle - so better pressure, ~60% better cleaning, same cleaning surface area, faster cleaning speed.)
* Rental Spec is a higher spec than Industrial Spec in the sense that it has a stronger frame of thicker gauge steel with even less vibration, and is hot-dip galvanized with a 5-year frame warranty.
Note: There are may Honda knock-offs on the market! Make sure you buy a GENUINE HONDA because the knock-offs don't last and you can't get them repaired!
Please download the Specification Sheet in PDF below for detailed information.
Download PDF specification sheet
| FEATURES | BENEFITS |
| CHASSIS | |
| Heavy Duty - all steel hot dip galvanized roll frame | Preventing rust in harsh conditions increasing life almost indefinitely. |
| IMPORTANT: By-pass valve, water supply hose and water delivery hose are all mounted on the FRAME - not directly on the pump | No pulling on vulnerable pump fittings while working. By-pass not putting extra strain on pump-gearbox-drive-shaft and not amplifying vibration |
| Lifting eye/bar | For easy lifting onto utes and trucks for transport and tie-down |
| 4 x Heavy duty over-sized pneumatic bump wheels | For easy rolling over uneven work area surfaces like construction sites |
| ENGINE - PETROL | |
| 5.5 HP Recoil Start HONDA GX200 low revving Petrol Engine | 3-Year HONDA factory warranty |
| PUMP | |
| HAWK HC280A -1740PSI max. 14 LPM | The world's best pump in the pressure cleaning industry - renowned for its quality, efficiency and reliability. |
| Ceramic sleeved 316 s/steel pistons and s/steel camshaft | Ceramic resist premature wear and withstands high internal temperatures and ensures smooth operation |
| Brass pump head | Last the distance! |
| Spare parts and seals kept in stock | Completely repairable /rebuildable |
| Glycerin filled stainless steel pressure gauge to twice safe working pressure | |
| BY-PASS VALVE | |
| K7-1 'zero' PSI by-pass valve - stores 'zero' pressure in hose and gun when trigger is released | Safest by-pass valve available. Soft |
| Soft acting low to high PSI | Smooth action protects gun |
| Fully repairable | |
| Zero PSI down-stream in HP accessories during by-pass | Less wear on seals, hose and gun when not in use. Reduces the risk of a bursting hose |
| SUCTION / WATER SUPPLY | |
| Primary over-sized in-line ¾" water filter with s/steel mesh | Prevents pump damage and extends pump life |
| HP DELIVERY | |
| 10 meters High Pressure Hose as standard. Extra hose available at knock-down prices. | R2, 160ºC - 4500 PSI SWP & 18000 PSI burst rating. Extra thick rubber wall to protect hose against damage |
| Italian-made quality dry shut off gun (rated to 300 BAR) with 900 mm s/steel lance & s/steel HP jet | |
| Hose end sleeved with protecting canvass | Protects operator against injury in case of hose failure or HP water leak. Also protects hose in high use area |
| SAFETY / PROTECTION FEATURES | |
| Automatic Thermoshield water over-temp dump valve in by-pass mode (63ºC) | Protects seals from damage from hot water |
| Using safest K7-1 by-pass valve | |
| Chassis 'ruggedized' and hot dip galvanized | Will withstand rough handling and abuse |
| Over-sized industrial quality water filter/s | |
| OTHER | |
| Fully serviceable engine, pump & by-pass valve | |
| Fully repairable engine, pump & by-pass valve | |
| Fully re-buildable engine, pump & by-pass valve | |