Washmate-4 4350 PSI, 18LPM. 15HP(11kW) Wash Bay Pressure Cleaner – MINE SPEC (E15M-43C)
Model: Washmate-4 (E15M-43C)
Electric Powered 15HP (11kW) Cold Water Wash Pad Pressure Cleaner - 415 Volt motor, built to Mine Spec. Using Hawk Pump: HC930 at 4350 PSI Maximum Pump Pressure, 18 LPM
A Super Duty 'high' pressure cleaner for Wash Bays built to the very tough Mine Spec for heavy or constant use.
Other Wash Bay Pressure Cleaners to consider:
- The Washmate-1 RENTAL SPEC - 3000 PSI, 18 LPM Light Duty Pressure Cleaner
- The Washmate-4 MINE SPEC - 4350 PSI, 18 LPM Heavy Duty (constant use)Pressure Cleaner
- The Washmate-5 MINE SPEC - HOT WATER- 4350 PSI, 18 LPM, Heavy Duty Pressure Cleaner
6960 PSI EWP* using a Turbo Nozzle
(*EWP = Effective Working Pressure - a theoretical figure. Because the water stream from a turbo jet does not fan out and the force of the jet stream does not dissipate as is the case with a fan jet/nozzle, the concentrated pencil jet stream hitting the surface is equivalent to a cleaning effect around 60% higher than with a fan jet. And because the turbo nozzle /roto jet spins in a circular motion at a very high speed, it still covers the same surface area as with a normal fan jet/nozzle - so better pressure, ~60% better cleaning, same cleaning surface area, faster cleaning speed.)
Please download the Specification Sheet in PDF below for detailed information.
Download PDF specification sheet
| FEATURES | BENEFITS |
| CHASSIS | |
| Heavy Duty - all steel hot dip galvanized frame | Preventing rust in harsh conditions increasing life almost indefinitely |
| All steel galvanized hose reel with 50 m capacity - 30 m HP hose comes as standard | Toughest hose reel on the market! |
| Built-in galvanized slave oil tank which triples oil supply to pump | Built-in galvanized slave oil tank which triples oil supply to pump |
| Heavy Duty Bolt Down Legs | Ensures unit is secured for operator safety |
| MOTOR | |
| Heavy duty ball bearing Class 'H' wound electric motor | Extends motor life to tens of thousands of hours compared to lower insulation classes |
| 415 Volt, 20 Amp electric motor | |
| Over-load shutdown | Protects the motor against over-load |
| 11 kW -1460 rpm cast iron 'Mine Spec' electric motor | |
| Heavy duty all ball bearing construction - greasable | |
| Fully rewindable | |
| Over-sized to applied load | Allowing to operate below maximum with low wear and tear |
| Direct drive to pump via shock absorb over-sized tyre to pump coupling | Reduces wear and tear on motor and pump bearings and shaft |
| Clipsal 32 amp plug - 4-pin | |
| CONTROL PANEL | |
| 316 Stainless steel heavy duty control box | Protecting vulnerable internal electric components -Protects against mechanical damage, UV, water, dirt and rust |
| Vibration mounted control box | Protects components and wiring against long-term damaging vibration |
| Star Delta Stop/Start | Reduces start-up current |
| Indicator power 'ON' lamp | User friendly controls makes operation easy and fool-proof |
| Hours Run Meter | Easy to determine maintenance requirements |
| Heavy Duty rubber booted On/Off buttons | Waterproof to protect electric controls |
| No PLC boards | For easy maintenance by any electrician on any remote site |
| PUMP | |
| HAWK HC930A - 4350 PSI max. 18 LPM | The world's best pump in the pressure cleaning industry - renowned for its quality, efficiency and reliability. |
| *De-rated to 3000PSI | Running pump below maximum design limits extends pump life dramatically |
| Ceramic sleeved 316 s/steel pistons and s/steel camshaft | Ceramic resist premature wear and withstands high internal temperatures and ensures smooth operation |
| Brass pump head | |
| Slave oil reserve tank - tripling oil to Hawk pump | This ensure pump parts are always lubricated and never runs dry - extending pump life. |
| Spare parts and seals kept in stock | Completely repairable /rebuildable |
| Glycerin filled stainless steel pressure gauge to twice safe working pressure | |
| BY-PASS VALVE | |
| K7 or K1 zero PSI by-pass valve | Safest by-pass valve available. Can run 100 meters HP hose |
| Soft acting low to high PSI | Smooth action protects gun |
| Fully repairable | |
| Zero PSI down-stream in HP accessories during by-pass | Less wear on seals, hose and gun when not in use. Reduces the risk of a bursting hose |
| SUCTION / WATER SUPPLY | |
| Over-sized water filter ('Spraying Systems' NY126 1¼") with stainless steel mesh | Prevents pump damage and extends pump life |
| Stainless steel water break tank | Recirculating water saves water and break tank prevents dry motor running and cavitation - the biggest causes of pump failure. Also prevents water over heating. Municipal compliant |
| Low water monitor/switch | Auto shut-down prevents pump running dry |
| Brass float switch | |
| HP DELIVERY | |
| 30 meters High Pressure Hose | R2, 160ºC - 4500 PSI SWP & 18000 PSI burst rating. Extra thick rubber wall to protect hose against damage |
| All-steel heavy duty hot dip galvanized hose reel | |
| Italian-made quality dry shut off gun (rated to 300 BAR) with 900 mm s/steel lance & s/steel HP jet | |
| Hose end sleeved with protecting canvass | Protects operator against injury in case of hose failure or HP water leak. Also protects hose in high use area |
| SPECIFIC MINE SPEC FEATURES | |
| Mine Spec Class 'H' wound cast iron Electric Motor with grease nipples | |
| SAFETY/ PROTECTION FEATURES | |
| Shock absorbing hydraulic pulsation dampener /system accumulator | Protects seals from damage from hot water |
| Automatic Thermoshield water over-temp dump valve in by-pass mode (63ºC) | |
| Using safest K1 or K7 by-pass valve | |
| Chassis 'ruggedized' and hot dip galvanized | Will withstand rough handling and abuse |
| Vibration mounted control panel | |
| Rubber booted waterproof on/off buttons | |
| Slave oil reserve tank - tripling oil to Hawk pump | |
| Over-sized industrial quality water filter/s | |
| AUTO-SAFETY SHUT-DOWNS / BLOW DOWN / DUMP | |
| Timed by-pass shut down when idle (Set from 3 -20 min.) | Prevents excessive heat build-up in pump to prevent seal damage |
|
Low water supply |
|
|
Low oil level to Hawk pump |
|
|
Pump oil over temperature |
|
|
Motor overload |
|
| OTHER FEATURES | |
| Fully serviceable pump & by-pass valve | |
| Fully repairable pump & by-pass valve | |
| Fully re-buildable pump & by-pass valve |