‘Washmate-5′ 4350PSI, 18LPM. 15HP (11kW) HOT Water Wash Bay Pressure Cleaner – MINE SPEC (E15M-43H)

‘Washmate-5′ 4350PSI, 18LPM. 15HP (11kW) HOT Water Wash Bay Pressure Cleaner – MINE SPEC (E15M-43H)
Make an Enquiry

Model: Washmate-5   (E15M-43H)
Electric Powered 15HP (11kW) Hot Water Wash Pad Pressure Cleaner - 415 Volt motor, built to Mine Spec. Using a Hawk Pump: Hc930 at 4350 PSI Maximum Pump Pressure, 18 LPM. Runs a Diesel Boiler to 90 deg Celsius.

This is one of our two most popular wash bay pressure cleaners. This Super Duty 'Mine Spec' pressure washer is ideal for Wash Bays and Workshops where absolute reliability is essential. For disinfecting and/or degreasing and constant use.

Other Wash Bay Pressure Cleaners to consider:
- The Washmate-1 RENTAL SPEC - 3000 PSI, 18 LPM Light Duty Pressure Cleaner
- The Washmate-3 RENTAL SPEC - 4350 PSI, 18 LPM Medium Duty Pressure Cleaner
- The Washmate-4 MINE SPEC - 4350 PSI, 18 LPM Heavy Duty (constant use)Pressure Cleaner

6960 PSI EWP* using a Turbo Nozzle
(*EWP = Effective Working Pressure - a theoretical figure. Because the water stream from a turbo jet does not fan out and the force of the jet stream does not dissipate as is the case with a fan jet/nozzle, the concentrated pencil jet stream hitting the surface is equivalent to a cleaning effect around 60% higher than with a fan jet. And because the turbo nozzle /roto jet spins in a circular motion at a very high speed, it still covers the same surface area as with a normal fan jet/nozzle - so better pressure, ~60% better cleaning, same cleaning surface area, faster cleaning speed.)

Please download the Specification Sheet in PDF below for detailed information.

Download PDF specification sheet

FEATURES BENEFITS
CHASSIS  
Heavy Duty - all steel hot dip galvanized frame Preventing rust in harsh conditions increasing life almost indefinitely
All steel galvanized hose reel with 50 m capacity - 30 m HP hose comes as standard Toughest hose reel on the market!
Built-in galvanized slave oil tank which triples oil supply to pump Ensures pump is always lubricated and extending pump life far beyond 'normal'
Heavy Duty Bolt Down Legs Ensures unit is secured for operator  safety
MOTOR  
Heavy duty ball bearing Class 'H' wound electric motor Extends motor life to tens of thousands of hours compared to lower insulation classes
415 Volt, 20 Amp electric motor (Req. 32 Amp outlet)  
Over-load shutdown Protects the motor against over-load
11 kW -1460rpm cast iron 'Mine Spec' electric motor  
Heavy duty all ball bearing construction - greasable  
Fully rewindable  
Over-sized to applied load Allowing to operate below maximum with low wear and tear
Direct drive to pump via shock absorb over-sized tyre to pump coupling Reduces wear and tear on motor and pump bearings and shaft
Clipsal 32 amp plug - 4-pin  
CONTROL PANEL  
316 Stainless Steel heavy duty control box Protecting vulnerable internal electric components -Protects against mechanical damage, UV, water, dirt  and rust
Vibration mounted control box Protects components and wiring against long-term damaging vibration
Star Delta Stop/Start Reduces start-up current
Indicator power 'ON' lamp User friendly controls makes operation easy and fool-proof
Hours Run Meter Easy to determine maintenance requirements
Heavy Duty rubber booted On/Off buttons Waterproof to protect electric controls
Heat On/Off button User-friendly operation.
No PLC boards For easy maintenance by any electrician on any remote site
PUMP  
HAWK HC930A - 4350 PSI max. 18 LPM The world's best pump in the pressure cleaning industry - renowned for its quality, efficiency and reliability.
As standard is *de-rated to 3000PSI (18LPM), but can be set higher Running pump below maximum design limits extends pump life dramatically
Ceramic sleeved 316 s/steel pistons and s/steel camshaft Ceramic resist premature wear and withstands high internal temperatures and ensures smooth operation
Brass pump head  
Slave oil reserve tank - tripling oil to Hawk pump This ensure pump parts are always lubricated and never runs dry - extending pump life.
Spare parts and seals kept in stock Completely repairable /rebuildable
Glycerin filled  stainless steel pressure gauge to twice safe working pressure  
BY-PASS VALVE  
K1 (zero PSI) by-pass valve Safest by-pass valve available. Can run 100 meters HP hose
Soft acting low to high PSI Smooth trigger action protects gun with no kick-back
Fully repairable  
Zero PSI down-stream in HP accessories during by-pass Less wear on seals, hose and gun when not in use. Reduces the risk of a bursting hose
SUNCTION / WATER SUPPLY  
Over-sized water filter with stainless steel mesh Prevents pump damage and extends pump life
Additional secondary over-sized inline water filter between pump and boiler Filters out any scale from boiler - protecting pump
Incorporates a water break tank as part of boiler Recirculating water saves water and break tank prevents dry motor running and cavitation - the biggest causes of pump failure. Also prevents boiler over heating.
Low water monitor/switch Auto shut-down prevents pump running dry
Incoming PSI regulator  
HP DELIVERY  
30 meters High Pressure Hose R2, 160ºC - 4500 PSI SWP & 18000 PSI burst rating. Extra thick rubber wall to protect hose against damage
All-steel heavy duty hot dip galvanized hose reel Strongest, toughest, best hose reel on the market - engineered and built in-house!
Italian-made quality dry shut off gun (rated to 300 BAR) with 900 mm s/steel lance & s/steel HP jet  
Hose end sleeved with protecting canvass Protects operator against injury in case of hose failure or HP water leak. Also protects hose in high use area
BOILER / ENGINE HEATING  
Black steel steam coil (s/steel optional)  
Heavy duty horizontal thick wall coils - ½". Secured within double outer sleeve acting as pre-heater -rated to 350 BAR / 30 LPM at 90ºC - *de-rated Ensures operator safety. Boiler outer casing stays cool. Energy efficient due to heat recovery. 1/2" coils don't scale up as standard 3/8" coils do
Burner NT 130 featuring constant ignition and air flow Top quality burner used
Pre-set thermostat and PSI switch to control fuel induction into combustion chambers To ensure boiler safety
Over-sized CAV296 fuel filter Reduces replacement cycle
12-hour fully hot dip galvanized fuel tank for Diesel Burner Reduces refueling frequency. Galvanizing prevents rust inside tank.  Large 'dead spot' accumulates fuel contaminants.
Low fuel shut-down  
Boiler slaved off main control panel behind all other instant and timed shutdowns  
Pneumatic Accumulator Prevents water hammering and absorbs pressure spikes - protecting various components
SPECIFIC MINE SPEC FEATURES  
Mine Spec Class 'H' wound cast iron Electric Motor with grease nipples  
SAFTEY / PROTECTION FEATURES  
Shock absorbing hydraulic pulsation dampener /system accumulator Protects pump, hose, seals and gun from damaging water hammering
Automatic Thermoshield water over-temp dump valve in by-pass mode (63ºC) Protects seals from damage from hot water
Using safest K1 by-pass valve No pressure stored in hose. No kick-back when trigger is pulled
Chassis 'ruggedized' and hot dip galvanized Will withstand rough handling and abuse
Vibration mounted control panel  
Rubber booted waterproof on/off buttons  
Slave oil reserve tank - tripling oil to Hawk pump  
Over-sized fuel filter/s  
Over-sized  industrial quality water filter/s Prevents water debris damaging pumps and blocking jets
Auto-safety shut-downs/ blow down/ dump:  
Timed by-pass shut down when idle (Set from 3 -20 min.) Prevents excessive heat build-up in pump to prevent seal damage
Low water supply  
Boiler over temp blow-down valve  
Low fuel level  
Low oil level to Hawk pump  
Pump oil over temperature  
Motor overload  
OTHER  
Fully serviceable pump & by-pass valve  
Fully repairable pump & by-pass valve  
Fully re-buildable pump & by-pass valve